Reel to Reel System Construction

The Reel-to-Reel system was constructed from 1 inch T-slotted framing. All components were mounted onto the frame.

Reel to Reel Thickness Sensor Addition

A thickness sensor was added to the system. Mounting components were designed and manufactured out of Aluminum. This sensor is designed to measure the thickness of the tape in micron levels, before the tape is submerged into the liquid nitrogen for testing. A Python code was written to communicate with the sensor and record the measurements and display them in real time.

Coil Winding System Construction

The coil winding table was constructed with T-slotted framing, and custom designed components. Electrical systems were wired together. Most recently a control panel display mount was designed and manufactured. An electrical enclosure was also designed to house components for the winding motor.